- It is applied for thermal insulation and condensation control on the outer surfaces of ducts and large diameter pipelines in heating, cooling, ventilation and air conditioning systems.
- It is recommended to use Al-foil coated products in volumes where radiant heat transfer is possible
- Using the special adhesive recommended by İzocam, the boards are adhered to the duct surface to be applied.
- Joints should be glued to ensure tightness, and if necessary, sealed with insulation tape after gluing.
- Taping should not be so tight as to cause loss of thickness. Self-adhesive boards do not require the use of additional adhesive.
- The application must be protected against punctures and tears. For applications exposed to sunlight, a protective jacket or protective paint must be used against UV effects.
- Using the special adhesive recommended by İzocam, the boards are adhered to the duct surface to be applied.
- Al-foil coated products can be used in sunlit indoor environments without the need for a separate coating against the UV effect.
- Outdoor applications should be covered within 5 days.
it was founded on 03.01.2023 in Gaziantep. Engineering solutions for steam, fire, water systems.
Quick Menu
Our Products
Contact
-
Beylerbeyi, 84027 Nolu Sokak No:11/G, 27000 Şehitkamil/Gaziantep
-
info@zenteknik.com
-
+90 342 502 58 91
-
+90 552 881 97 27
© 2024 Zen Teknik Engineering Tüm Hakları Saklıdır. | Gizlilik Politikası
Web Design Digital Küre