Unique Process Tracking and Ease of Use organized with the use of high capacity CPU and 7” Panel Screen.
Additional efficiency increase (1.6-1.8%) provided by pre-heating the combustion air by passing it through the double-jacketed body and Body Heat Loss minimized by the natural insulation feature of the combustion air.
Redundant Control and Protection Fixtures for Maximum Safety (Triple Pressostat Group, Double Temperature Probe, Pressure Transmitter, Combustion Cell Thermocouple Controller)
Quintet Serpentine Design, which provides the opportunity to operate at Controlled Low Combustion Temperature, Low Flue Temperature and High Efficiency (~93%) by increasing the heat transfer surface.
True Fully Saturated Steam Quality ensured by independent controls of Steam Temperature and Pressure. (PID Controlled Optimization of Pressure Controlled Burner Flame Amount with Temperature Controlled Pump Flow.)
Modulated Operation in Variable (30-100%) capacity range provided by Electronic Proportional Control Module.
Super Control Scheme, which provides automatic measurement, control and tracking of all process inputs. (Steam Flow Rate, Water Consumption, Gas Consumption Measurements. Conductivity, Hardness and pH Measurement Control options.)
PLC Controlled Pneumatic Modulated (stroke<3 sec.) Outlet Valve that prevents excessive pressure drop by throttling the line at peak traction.
High Pressure (>30 bar), Three Cylinder, Dual Feedwater Pump design that allows the unit to continue operation in case of failure.
High Capacity H - Series
H SERIES STEAM GENERATORS
- 2.000-4.000 kg/h. capacity range, 10-16 bar steam operating pressures, gas and/or liquid fueled, double serpentine structure.
All measurement, control and safety fittings are selected from internationally recognized brands and almost all of them are backed up.
Some technological advantages of the units are summarized below. - Compliant with 97/23EC Norms P quality heavy duty construction designed with the use of sheet metal and pipe.
- Pressure Vessel and License regulations suitable, low water volume Full Safety Construction.
- Permak Fail Proof All control elements for Additional Safety Secure Design using redundancy (dual).
(Double Mechanical Safety Valve, Double Pressure Switch, Double Temperature Transmitter.) - PLC Controlled Full Modulation (1/10-10/10; Burner, External Fan and Pump Controlled) where all process parameters can be included in the system with special software Automatic Operation System.
- Maintaining Steam Quality, preventing water entrainment and generator stalling, enabling fully automatic start stop operations on units
Pneumatic Output Valve Module with Proportional Control. - İş başlangıcında sistemin otomatik rejime girmesini PLC Controlled Pneumatic Start Valve Group.
- Selonoid Valve Grb. which provides automatic (programmable) Bottom Blowdown at the end of the work.
- * High efficiency Improved Design with Dual Main Coil and Additional Flue Gas Line Preheating Coil providing.
(Efficiency˃91.5% average, Flue Gas Temperature˂250°C, Flue O2˂3.5%, Flue NOx˂60 ppm.) - By preheating the combustion air in the double jacketed outer wall provided Energy Savings and Minimum Thermal Radiation. (Thava˃80°C, Yield Increase: +1.6:1.8%.)
- External fan designed with special flame length proportional to the combustion cell and coil group for Steam Generators, Beck Type Burner Group. (Flam)
- Additional Tum Module with quad level electrode control that protects the entire system by continuously measuring the water level and temperature inside the coil.
- * High pressure water supply Triplex Pump Group designed as a double unit for economical redundancy in special cases.
- Conductivity Control Module obstion that measures the feed water quality and protects the system under unfavorable conditions.
- All electrical and electronic elements from internationally recognized brands (Schneider & Siemens) was selected for the Compact Electrical Panel.
- * Complete System supply and installation advantage with auxiliary equipment.
(Besisuyu Tankı, Ara Basınç Pompası, Su Yumuşatma&RO, Flash Buhar Eşanjör, Dozaj Ünitesi, Blöf Mixer vb.) - "Package System" option, where all equipment is assembled into a Platform or Container on request.
- * TÜV, TSEK, Gazmer Quality Certificates. Additional SIL&PL Special Quality Certification obstion.
it was founded on 03.01.2023 in Gaziantep. Engineering solutions for steam, fire, water systems.
Quick Menu
Our Products
Contact
-
Beylerbeyi, 84027 Nolu Sokak No:11/G, 27000 Şehitkamil/Gaziantep
-
info@zenteknik.com
-
+90 342 502 58 91
-
+90 552 881 97 27
© 2024 Zen Teknik Engineering Tüm Hakları Saklıdır. | Gizlilik Politikası
Web Design Digital Küre